Qingdao Luhang Marine Airbag and Fender Co., Ltd
Qingdao Luhang Marine Airbag and Fender Co., Ltd We are devoted to supplying guaranteed marine airbags and fenders.
Add to Cart
Pneumatic Marine Fender 1.0m x 1.5m Ship Berthing Bumper Mooring Fender
The purpose of the pneumatic rubber fender
A] ship to ship berthing
Accompanied by a large ship, the risk of two ship berthing at sea is also increased, especially when the weather changes, accompanied by wind and waves.Adopt pneumatic fender as side of the buffer, not only make heavy berthing becomes easy, and improve the efficiency of the transportation operations.
B] For terminal dock protection
Of the ship is very large, the cause of berthing impact energy have multiplied.Inflatable rubber fender because of its high energy absorption and low reaction force features are widely used.
The advantages of pneumatic rubber fender
1. Choose reinforce synthetic-tire-cord layers
2. No mold vulcanization and attach surrounding molding process
3. High energy absorption and low reaction force
4. Good adaptability to tilt in contact
5. Floating on the surface of the water, ship swaying can apply
Structure characteristics of the pneumatic rubber fender
LuHang Pneumatic Rubber Fenders made of an outer rubber, reinforcement synthetic-tyre-cord layer, and inner rubber, vulcanized firmly.
A]. the outer rubbers are used to protect the cord layers and inner rubber from abrasion and other external forces. This rubber compound have sufficient tensile and tear resistance strength to withstand anticipated weather conditions and severe usage.
B]. the reinforcement synthetic-tyre-cord layer strong enough to maintain the internal air pressure of the fender.
C]. the inner rubber layer seals the pressurized air inside the fender.
D]. fenders of diameter 2500mm and larger equipped with safety valve for releasing excess internal pressure when the fenders are over-compressed accidentally.
Fender assembly for the end of metal, by inside and outside the two flanges with bolts, nut clamping, center is a valve, its structure is similar to automobile tire valve.
| Size(mm) | Compression at 60% | Refence weight (KG) | ||
| Diameter | Leagth | Energy absorption(KJ) | Reaction (KN) | |
| 500 | 1000 | 6 | 64 | 25 |
| 600 | 1200 | 10 | 86 | 35 |
| 700 | 1500 | 17 | 137 | 50 |
| 1000 | 1500 | 32 | 181 | 80 |
| 1000 | 2000 | 45 | 257 | 100 |
| 1200 | 2000 | 63 | 297 | 120 |
| 1350 | 2500 | 100 | 426 | 170 |
| 1500 | 3000 | 153 | 579 | 320 |
| 1700 | 3000 | 190 | 637 | 400 |
| 2000 | 3500 | 308 | 875 | 590 |
| 2500 | 4000 | 663 | 1380 | 1000 |
| 2500 | 5500 | 932 | 2010 | 1400 |
| 3000 | 5000 | 1050 | 2030 | 1800 |
| 3000 | 6000 | 1315 | 2488 | 2200 |
| 3300 | 6500 | 1814 | 3015 | 2700 |
| 3500 | 6000 | 2018 | 3286 | 2800 |
| 3500 | 6500 | 2325 | 3656 | 3200 |
| 3500 | 7500 | 2650 | 4018 | 3600 |
| 4500 | 9000 | 4752 | 5745 | 6800 |